Precautions for daily maintenance of the hub

Precautions for daily maintenance of the hub:

1. When the temperature of the hub is high, it should be cleaned after it is naturally cooled. Never use cold water to clean it; otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed to affect the braking effect. In addition, cleaning the aluminum platform gold hub with a cleaning agent at high temperatures will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.

2. When the wheel is covered with hard-to-clear tar, if the general cleaning agent does not help, try to remove it with a brush, but do not use a hard brush, especially an iron brush, to avoid damage to the hub surface. Some experts have introduced a remedy for removing tar: that is, using medicinal "active oil" to rub, you can get unexpected results, car owners may wish to give it a try.

Minor scratches can be repaired by yourself:

1: Clean the hub. We can use paint dilutions to wipe around the scars and remove dirt. Guardian aluminum forgings indicate that the deepest part of the scratch is difficult to remove dirt, and it can be thoroughly cleaned with a toothpick. When cleaning, in order to prevent accidental application of paint to the unrelated parts, carefully stick the adhesive tape around the scar.

2: The owner arranges the tip of the brush and applies the lacquer to the damaged area of the wheel. After the lacquer is dried, it is slightly convex and easy to be observed by the owner.

3: After the vehicle is completely dried, the paint is applied with soapy water on a water-resistant paper to smooth the surface. Then use a mixture to wipe out the light and finally wax.

4: If the owner finds a deep scar on the wheel hub, and must observe whether the metal surface is exposed, if the metal surface is not visible, it will not rust. You can concentrate on the finishing paint. Use a pen tip to pick up the spot and wait until the paint is completely dry.